Differences

This shows you the differences between two versions of the page.

--- mission:log:2015:07:07:green-ethernet-switch-review-dlink-dgs-1100-8-managed-switch [2015-07-07 12:17] – created chrono
+++ mission:log:2015:07:07:green-ethernet-switch-review-dlink-dgs-1100-8-managed-switch [2017-01-10 05:37] (current) – chrono
@@ Line 11: / Line 11: @@
 ===== Power Consumption Analysis =====
-For better comparison all measurement results have been put together. A couple of people have been a bit unhappy, that we've only documented power consumption on the DC side in the past review (which is all we care about for off-grid usage). As a result, this time we've documented DC and Wall-Power consumption (with the original D-Link AC/DC plug).
+For better comparison all measurement results have been put together. A couple of people have been a bit unhappy, that we've only documented power consumption on the DC side in the past review (which is all we care about for off-grid usage). As a result, we've documented DC and Wall-Power consumption with the original D-Link AC/DC plug.
 ==== Test-Setup ====
@@ Line 45: / Line 45: @@
 </WRAP>
+===== Under the Hood =====
+==== PCB ====
+{{:mission:log:2015:07:07:d-link-dgs-1100-8-board-top.jpg|d-link-dgs-1100-8-board-top}}
+{{:mission:log:2015:07:07:d-link-dgs-1100-8-board-bottom.jpg|d-link-dgs-1100-8-board-bottom}}
+==== Serial Console ====
+{{:mission:log:2015:07:07:d-link-dgs-1100-8-j1-connector-serial.jpg|d-link-dgs-1100-8-j1-connector-serial}}
+There is some sort of serial console on J1 (576008N1)
+<code>
+==========Loader: 1.0.13 (Build: Apr 10 2013, 13:51:22)==========
+[Loader] dummy_init......
+==========Loader start===========
+Press any key to start the normal procedure.
+To run SPI flash viewer, press [v]
+To enforce the download of the runtime kernel, press [ESC]
+    Check Runtime Image.....
+    Chksum Correct!
+    RunTime Kernel Starting....
+SalFlshCopyFlshToCache()
+[FW] dummy_flash_toCache......
+sal_sys_config_restore()DHCPC is disabled.
+...OK
+sal_mirror_config_restore()...OK
+sal_qos_config_restore()...OK
+sal_vlan_config_restore()...OK
+sal_trunk_config_restore()...OK
+sal_rate_config_restore()...OK
+sal_port_config_restore()...OK
+sal_l2_config_restore()...OK
+sal_loop_config_restore()...OK
+sal_eee_restore()...OK
+sal_green_restore()...OK
+sal_admin_restore()...OK
+sal_igmp_restore()...OK
+==========Runtime: 1.10.030 (Build: Oct 17 2014, 12:18:16)==========
+### dummy_init......OK!
+</code>
 ===== Conclusion =====
@@ Line 51: / Line 96: @@
 {{tag>ethernet switch review hardware test energy}}
-~~LINKBACK~~
 ~~DISCUSSION~~

User Tools

Site Tools

Differences

Page Tools