Differences

This shows you the differences between two versions of the page.

--- mission:log:2013:06:09:project-release-pigi-rapsberry-pi-geiger-counter [2013-06-09 10:37] – [Project Release: PiGI Module] chrono
+++ mission:log:2013:06:09:project-release-pigi-rapsberry-pi-geiger-counter [2013-06-16 12:31] (current) – updated tags chrono
@@ Line 10: / Line 10: @@
 {{:lab:pigi-on-raspberry-pi-longterm-bench-test.jpg|}}
-{{tag>geiger pi raspberry hardware radiation monitoring research development}}
+===== =====
+The fun thing about this project was that it also served as a test to determine if the lab, tools and equipment carried by Apollo-NG would be sufficient to build it. During the development and building, no other technologies could be used to make it. Only tools/resources that are available and run on a 12V power rail (including soldering).
+As a byproduct there were some lessons learned about SMT soldering and how one can make that really easy up to the point where it is totally zen to solder and you'd never miss the old days of through-hole soldering. One of the key factors is vision. So the question was: How does one build a cheap stereoscope? And the answer will follow in another post in the near future.
+{{tag>pigi geiger pi raspberry hardware radiation monitoring research development}}
 {{keywords>Apollo-NG apollo next generation hackerspace hacker space development makerspace fablab diy community open-resource open resource mobile hackbus geiger pi raspberry hardware radiation monitoring research development}}