Differences

This shows you the differences between two versions of the page.

--- mission:log:2012:07:08:collet-chucks-for-picocnc-arrived [2012-07-09 05:49] – chrono
+++ mission:log:2012:07:08:collet-chucks-for-picocnc-arrived [2013-06-08 10:49] (current) – chrono
@@ Line 1: / Line 1: @@
+====== ER16/11 Collet-Chucks for PicoCNC spindle arrived ======
+Leave it to the Chinese, to come up with good quality products, completely unavailable anywhere else, for a really awesome price. After 3 weeks of waiting, the collet-chucks (ER11 & ER16) for the [[mission:resources:picocnc]] spindle finally arrived directly from Hong-Kong:
+[{{:mission:log:2012:07:08:picocnc-spindle-er16-er11-collet-chucks.jpg?640|CTC-Tools ER16/ER11 collet-chucks, collets and clamping nuts in comparison}}]
+~~CL~~
+There are a lot of ER11 and ER16 collet-chucks out there, so what makes these one so special? Simple: These ones come with an 8mm shaft, which is going to be inserted as a drop-in replacement for the 8mm motor shaft of a 5045 class brushless outrunner.
+After a preliminary review, the first prototype will be built with the more massive ER16 collet-chuck, since the threading will probably survive longer and the collets also seem to be more //heavy-duty// than the ER11.
+If it works and all other parts play equally well, it should be possible to build a robust and precise enough power spindle for a CNC router/gantry system for less than 100EUR. It might also be an attractive option for other Hackerspaces and FabLab's who are building CNC routers as well.
+<WRAP round info>
+**More Details**\\
+[[mission:resources:picocnc|PicoCNC Main Page]]
+</WRAP>
+{{tag>picofab picocnc spindle collet chucks cnc}}
+{{keywords>Apollo-NG apollo next generation hackerspace hacker space development makerspace fablab diy community open-resource open resource mobile hackbus picofab picocnc spindle collet chucks cnc er16 er11}}
+~~DISCUSSION~~

User Tools

Site Tools

Differences

Page Tools