User Tools

Site Tools

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
lab:seedstack [2015-10-19 11:14] – [0h] chronolab:seedstack [2016-12-13 19:31] (current) – old revision restored (2015/10/19 11:16) chrono
Line 157: Line 157:
 The seeds have been completely submerged in room temperature tap water for about 8 hours in a cup, then put into the seedstack container. The seeds will sprout without this step, however, giving the seeds 8 hours in water seems to have an effect on the overall mass the sprouts will yield. The seeds have been completely submerged in room temperature tap water for about 8 hours in a cup, then put into the seedstack container. The seeds will sprout without this step, however, giving the seeds 8 hours in water seems to have an effect on the overall mass the sprouts will yield.
  
-After putting the seeds into the seedstack container they need to be flushed twice per day (morning/evening). To flush the seeds, about 500ml of water are poured in the topmost container (if you have more than one) and will drain automatically at the bottom. This might also be a good job for an Arduino controlled valve/pump. +After putting the seeds into the seedstack container, they need to be flushed twice per day (morning/evening). To flush the seeds, about 500ml of water are poured in the topmost container (if you have more than one) and will drain automatically at the bottom of the container. This might also be a good job for an Arduino controlled valve/pump. 
 ==== 0h ==== ==== 0h ====
  
Trace:

Page Tools