Differences

This shows you the differences between two versions of the page.

--- lab:growlab:howto-install-esphome-onto-shelly-dimmer-2 [2024-03-04 21:35] – created chrono
+++ lab:growlab:howto-install-esphome-onto-shelly-dimmer-2 [2024-03-04 21:54] (current) – [Step 0: Unpack & wire up the dimmer] chrono
@@ Line 1: / Line 1: @@
 ====== HOWTO Install ESPhome onto Shelly Dimmer 2 ======
+===== Step 0: Unpack & wire up the dimmer =====
+Unpack your dimmer and connect at least one of the L terminals and the N terminal to your mains. If you are unsure about dealing with **mains voltage (danger beware)**, you can follow me on video here or ask someone who knows more about it.
 ===== Step1: Connect to OG Mongoose WebUI on the shelly =====
@@ Line 22: / Line 25: @@
 </code>
-===== Step3: =====
+===== Step3: Set up Tasmota to join the network =====
-===== Step4: =====
+===== Step4: Connect and prepare Tasmota Update =====
-===== Step5: =====
+===== Step5: Compile a minimal firmware in ESPhome=====
+===== Step6: Download and zip minimal firmware =====
+===== Step6: Upload minimal firmware to Tasmota =====
+===== Step7: Upload intended firmware via OTA =====